4 Steps You Should Take If You Have A Leaky Faucet 

Dealing with a leaky faucet can be an unexpected annoyance, but with the right approach, you can fix it quickly and efficiently. Addressing the issue will enable you to save water, reduce your utility bills and prevent further damage to your sink and countertop. You can also contact a chatsworth plumber if you don’t want to deal with the stresses of fixing your faucet alone. Here’s what you can do to fix a leaky faucet. 

  1. Identify the Type of Faucet

Before you can fix your leaky faucet, it’s crucial to identify the type of faucet you have. Faucets come in various designs, including compression, ball, cartridge, and disc types. Each type has different mechanisms and requires a different approach to repair.

Begin by examining the handle of your faucet. Compression faucets have separate hot and cold handles and operate by compressing a rubber washer against a valve seat. If your faucet has a single handle that moves side to side and up and down, it is likely a ball or cartridge faucet. Ball faucets contain a ball bearing, while cartridge faucets use a cartridge mechanism. Disc faucets, often recognized by their single lever that moves over a wide arc, use a pair of ceramic discs to control the water flow.

Knowing the type of faucet you have will help you determine the necessary tools and replacement parts. It’s also useful for finding the right repair instructions. Look up your faucet model online if you need more information, or consult the manufacturer’s manual if you have it.

  1. Gather Your Tools and Supplies

Once you’ve identified your faucet type, gather all the tools and supplies you’ll need. This step is essential to avoid unnecessary interruptions once you start the repair. Common tools for faucet repair include an adjustable wrench, screwdrivers (Phillips and flat-head), pliers, and a hex key (Allen wrench).

Additionally, you’ll need some specific supplies based on your faucet type. For example, compression faucets typically require new rubber washers and O-rings. Cartridge and ball faucets might need replacement cartridges or ball bearings, respectively. It’s also a good idea to have plumber’s grease on hand to lubricate moving parts and ensure a smooth operation once reassembled. Before you start, make sure to shut off the water supply to the faucet. 

  1. Dismantle the Faucet

This step requires patience and attention to detail, as you will need to remember how everything fits together for reassembly. Start by removing the handle. For compression faucets, unscrew the decorative cap, if present, and then the screw holding the handle in place. Pull off the handle to expose the valve stem. For ball, cartridge, and disc faucets, you may need to remove a set screw, usually located at the base of the handle, using an Allen wrench.

With the handle removed, take note of how the internal components are arranged. It can be helpful to take photos as you go to reference during reassembly. Carefully remove the components, such as the nut, stem, or cartridge, depending on your faucet type. Use pliers or an adjustable wrench to loosen any parts that are difficult to remove by hand.

Inspect the removed parts for signs of wear and tear. Look for cracks, corrosion, or worn-out rubber seals. These are often the culprits behind a leaky faucet. Replace any damaged components with new ones from your repair kit. If your faucet uses washers or O-rings, make sure the replacements are the correct size.

  1. Reassemble and Test

With the faulty parts replaced, it’s time to reassemble your faucet. Follow the reverse order of disassembly, ensuring each component is correctly placed and secured. If you took photos during the dismantling process, use them as a reference to make sure everything goes back in the right order.

Summing Up

Fixing a leaky faucet may seem daunting at first, but by following these four steps, you can tackle the problem with confidence.

Comments are closed.